
ST WHEEL MOUNTING HARDWARE
​
Perfect mounting hardware for all your wheel spacers
​
ST WHEEL BOLTS
​
For the installation of systems D1, D2, DZ and DZX we recommend ST wheel bolts in black or silver. Note that the length of the bolts depends on the thickness of the selected wheel spacer. In addition, the type of screw seat and thread must be considered.
Important note! Minimum thread engagement must be considered:
-
M12x1.25 at least 8.0 turns
-
M12x1.5 at least 6.5 turns
-
M12x1.75 at least 6.5 turns
-
M14x1.25 at least 9.0 turns
-
M14x1.5 at least 7.5 turns
-
1/2”at least 8.0 turns
​
Caution:
Wheel bolts that are too long may cause damage at the axle components.
​
ST SHAFT NUTS
​
ST shaft nuts allow you to easily use all DZX spacers on vehicles with wheel studs. Thanks to the extended shaft of the nut the shaft nut reaches through the mounting holes of the rim so the shaft nut can be screwed on with enough thread engagement to the original wheel studs of the vehicle. A complicated conversion to longer wheel studs is no longer necessary.
The ST shaft nuts may only be mounted in combination with DZX wheel spacers. In addition, the type of the shaft nut must be checked.
Important note! Minimum thread engagement must be considered:
​
-
M12x1.25 at least 12.0 turns (15mm supporting thread)
-
M12x1.50 at least 10.0 turns (15mm supporting thread)
-
M14x1.50 at least 12.5 turns (19mm supporting thread)
-
1/2”at least 12.0 turns (16mm supporting thread)
​
ST DOUBLE-THREADED STUDS
​
The ST threaded studs are used to mount the wheel to the AZX spacer system after mounting it to your hub. The ST threaded stud is an M14x1.5 screw-in stud that converts to 4 various thread pitch options and enables an easy conversion from wheel bolts to wheel studs. The AZX-spacers feature a pressed-in M14x1.5 threaded sleeve that is used for bolt-on systems for vehicles with wheel bolts. The ST threaded studs are screwed into these threaded sleeves. Now the AZX wheel spacers can be used for vehicles that come standard with wheel nuts. The ST threaded studs are available in different thread types so that the original wheel nuts can be used.
Important note! Minimum thread engagement must be considered:
​
-
M12x1.25 at least 8.0 turns
-
M12x1.5 at least 6.5 turns
-
M12x1.75 at least 6.5 turns
-
M14x1.25 at least 9.0 turns
-
M14x1.5 at least 7.5 turns
-
1/2”at least 8.0 turns
​
Caution:
Wheel bolts that are too long may cause damage at the axle components.
After disassembling the double-threaded bolts from the spacer, they may not be used a second time and should be replaced by new ones.
​
ST ANTI-THEFT PROTECTION
​
More safety for your wheels
​
ST anti-theft protection wheel hardware guarantees an effective theft protection for your wheels. Note that the length of the anti-theft hardware depends on the thickness of the selected wheel spacer. In addition, the type of seat and thread pitch must be observed.
Important note! Minimum thread engagement must be considered:
​
-
M12x1.25 at least 8.0 turns
-
M12x1.5 at least 6.5 turns
-
M12x1.75 at least 6.5 turns
-
M14x1.25 at least 9.0 turns
-
M14x1.5 at least 7.5 turns
-
1/2”at least 8.0 turns
​
Warning:
Anti-theft protection hardware that is too long may cause damage at the axle components.